or depending on the model version) from the manufacturer or reseller site like ukoter.co.uk.
Insert the blade into the blade holder (cartridge) and adjust the cap so only a tiny sliver of the blade (about half the thickness of a credit card) is visible. 721-.rar
If you are using the USB connection, you must install the proper drivers to create a virtual COM port. or depending on the model version) from the
: You may need FTDI VCP drivers available from FTDI Chip to allow the OS to send commands via USB. 3. Software Configuration : You may need FTDI VCP drivers available
model and choose "Direct USB" or "Direct COM" depending on your cable. 4. Running Your First Cut
is a 28-inch model typically requiring a stand for stability. :
typically uses commands. You must match the software settings to the cutter's hardware settings. SignCut Setup : Select "Refine" as the manufacturer and " " as the model.