Dcs_fa_18c_hornet_episode_3_preflight_startup_t... [NEW]

For a more comprehensive, printable reference, you can use the F/A-18C Hornet Quick Start Checklist or the community-favorite Chuck’s F/A-18C Guide. F/A-18C Hornet Startup in 60 Seconds!

: Press the Takeoff Trim button and set the flaps switch to HALF . dcs_fa_18c_hornet_episode_3_preflight_startup_t...

: Turn on the Left and Right DDIs , the AMPCD (center display), and the HUD once the right generator is online. For a more comprehensive, printable reference, you can

: Press the FCS Reset button. Perform the Flight Control System BIT test by holding the FCS BIT switch on the right wall while simultaneously pressing the FCS OSB on the right DDI. : Turn on the Left and Right DDIs

: Move the engine crank switch to RIGHT . Once RPM reaches approximately 25% , move the right throttle to the IDLE detent.

: Set the battery switch to ON (Right Console).

: Rotate the INS knob to GROUND (or CV if on a carrier). For faster alignment, select Stored Heading on the HSI page.